|
 QUICK LINKS |
|
 |
| |
|
|
 Conductivity Meter
|
|
MODEL CON - 06 is a micro controller
based system for fast and accurate measurement of conductivity
of liquids. The instrument covers wide measurement ranges, from
0.1 uS to 100 mS in six decadic steps, offering 0.001 uS
resolution in the lowest range. Conductivity cells of cell
constant 1 and 0.1 are supplied along with. The instrument offers
automatic temperature compensation, automatic cell constant
recognition, and user selectable temperature coefficient. An
optional printer interface parallel port is also available for
hard copy. The instrument is particularly useful where large
number of samples have to be tested, for example in D.M. plants,
Soil testing labs., Effluent treatment plants etc. The unit is
housed in a compact and light weight cabinet. It has minimum
panel controls making it very easy and simple to operate. |
|
|
| Features |
-
 Micro
controller based system for speed and accuracy.
-
Wide range coverage
-
Automatic recognition of cell constant.
-
Automatic temperature compensation.
-
User selectable temperature coefficient.
-
Very simple to operate.
-
Optional printer interface.
|
|
Specifications
|
|
Range |
0.1 uS to 100 mS (6 decadic ranges) |
|
Accuracy |
±1 % of the F.S. ±1 digit. |
|
Minimum Resolution |
0.001 uS |
|
Display |
7 digit, 7-segment LED
4 digits for conductivity
3 digits for temperature |
|
Cell constant |
Acceptable from 0.1 to 5 |
|
Cell constant recognition |
Automatic |
|
Temperature compensation |
0.0 to 9.9 % per °C. |
|
Power requirements |
230V, ± 10%, 50 Hz. |
|
Supplied accessories: |
1) Conductivity cell, cell constant 0.1
2) Conductivity cell, cell constant 1.0
3) Temperature probe
4) Clamp/Stand
5) Instruction manual |
|
|
*Technical Specifications, Appearance & model
number are subject to change without prior notice in keeping up
with the state of art. |
|
|
|
|
Micro Controller Based Conductivity-TDS Meter
|
|
Model CON - 08 is a high performance, Micro
controller based instrument for accurate Conductivity and TDS
measurements in various chemical and water testing Laboratories.
The instrument measures specific conductivity of solutions using
a conductivity cell and a Temperature probe using PT-100 sensor.
The Total Dissolved Solids (T.D.S.) are measured by multiplying
the conductivity with user-defined TDS factor. The Conductivity
range is covered from 0.1 uS to 100 mS and the TDS from 0.1 ppm
to 100 ppt in six Decadic ranges.
The instrument is having
facility for Automatic/Manual temperature compensation,
automatic cell constant recognition, user selectable temperature
coefficient and TDS factor. The readings are displayed on large
LED. Conductivity cell having cell constant 0.1 to 5.0 can be
used. Calibration data can be stored in battery back up memory.
Optional printer interface port for 80 CDMP is available for
hard copy. This versatile instrument is useful where large
number of samples have to be tested viz. D.M. Plants, Soil
testing labs, Environmental labs, Effluent treatment plants. The
unit is housed in a compact and light weight two-tone cabinet. |
|
|
| Salient Features |
-
 Micro
controller Based.
-
Conductivity / TDS /
Temperature measurements.
-
Automatic cell constant recognition.
-
Analysis mode, finds out temp. co-efficient of
unknown solution.
-
Calibration data can be stored in battery back
up memory.
-
Automatic/Manuel temperature compensation.
-
User selectable parameter entry using soft
touch keys.
-
Parallel port printer interface for hard copy
(Optional).
-
Single reading and
continuous reading printing facility in conductivity and TDS
measurement mode.
-
Seven segment LED display.
|
|
|
|
Specifications
|
|
Conductivity |
|
Range |
0.1 uS to 100 mS. (6 decadic ranges) |
|
Accuracy |
± 1% of F.S. ± 1 digit |
|
Minimum Resolution |
0.001 uS |
|
TDS |
|
Range |
0.1 ppm to 100 ppt. (6 decadic ranges) |
|
Accuracy |
1% of F.S. ± 1 digit |
|
Temperature |
|
Range |
0° C to 100° C |
|
Resolution |
0.1° C |
|
Accuracy |
± 0.2° C ± 1 digit |
|
Cell constant |
Acceptable from 0.1 to 5.0 |
|
Auto temp. Compensation |
0° C to 100° C with PT 100 sensor |
|
Manual temp. Compensation |
0° C to 60° C user selectable |
|
Conductivity temp. Co-efficient |
0.0% to 9.9% user selectable |
|
Display |
7 digits, 7 segment LEDs
(3 digits for TEMP/TEMPCO
4 digits for Conductivity/TDS)
With automatic decimal point selection. |
|
TDS-factor |
0.00 to 9.99 user selectable |
|
Power requirement |
230V AC. ± 10%, 50 Hz |
|
Standard Accessories |
i) Conductivity cell, cell constant 0.1
ii) Conductivity cell, cell constant 1.0
iii) Temperature probe (PT-100 sensor)
iv) Stand & Clamp
v) Instruction manual |
|
Optional |
Parallel port printer interface. |
|
Dimensions |
305 mm (W) x 265 mm (D) x125 mm (H) |
|
Weight |
3 kg. Approx. |
|
|
*Technical Specifications, Appearance & model
number are subject to change without prior notice in keeping up
with the state of art. |
|
|
|
|
|
Conductivity Analyzer
|
Art No. CON A-7 |
Art No. CON A- 8 |
Art No. CON A-9 |
|
| CONA-7 |
Microcontroller Based Conducitvity
Analyzer, |
| CONA-8 |
Microcontroller Based Conducitvity/TDS
Analyzer,Having Special Features like Scroling Display
of Conductivity & TDS alongwith Temperature, Auto/Manual
Temperature Compensation, Last Calibration storage with
date and reading, Current Results. Printing Facility
with calibration data etc. |
| CONA-9 |
Microcontroller Based Conducitvity/TDS/Resistivity
Analyzer,Having Special Features like Auto Ranging, Auto
Calibration, Self Diagnostice, Scrolling Display of
Conductivity,TDS & Resistivity alongwith Temperature,
Parallel & Serial Port for Printer & PC attachment,
Report Formation as per GLP Compliance,150 Reading
Storage facility with Batch No., Real Date & Time,
Operator Name,Sample Name,Searching of data as per Batch
No., Results Hold / Un-Hold Facility etc. |
|
|
|
|
Microcontroller Based Melting / Boiling Point Apparatus, |
| MPBPA-17 |
|
Microcontroller Based Melting
/ Boiling Point Apparatus, Salient Features :- |
-
 Built
in Magnetic Stirrer with soft touch Key
Speed Controller
-
Simultaneous Display of
Melting Range as MP1 & MP2
-
Automatic Temperature
Compensation depending upon heating
requirement.
-
Facility to enter expected
Melting Point by using soft touch keypad
-
Push Button Key to prevent
contact problem.
-
On-site Temperature
Calibration by Calibrated Thermometer
|
|
| MPBPA-18 |
|
Microcontroller Based Melting / Boiling
Point Apparatus, Salient Features :- |
-
Built in Magnetic Stirrer
with soft touch Key Speed Controller
-
Simultaneous Display of
Melting Point Range as MP1 & MP2
-
Automatic Temperature
Compensation depending upon heating
requirement.
-
Facility to enter expected
Melting Point by using soft touch keypad
-
Push Button Key to prevent
contact problem.
-
On-site Temperature
Calibration by Calibrated Thermometer
|
|
|
|
|
|
|
 |
|
|
|
|
|